ITExamDump에서 출시한 Microsoft인증 070-545-VB덤프는Microsoft인증 070-545-VB시험에 대비하여 IT전문가들이 제작한 최신버전 공부자료로서 시험패스율이 100%입니다.ITExamDump는 고품질 Microsoft인증 070-545-VB덤프를 가장 친근한 가격으로 미래의 IT전문가들께 제공해드립니다. ITExamDump의 소원대로 멋진 IT전문가도 거듭나세요.
우리ITExamDump가 제공하는 최신, 최고의Microsoft 070-545-VB시험관련 자료를 선택함으로 여러분은 이미 시험패스성공이라고 보실수 있습니다.
ITExamDump에서는 Microsoft인증 070-545-VB시험을 도전해보시려는 분들을 위해 퍼펙트한 Microsoft인증 070-545-VB덤프를 가벼운 가격으로 제공해드립니다.덤프는Microsoft인증 070-545-VB시험의 기출문제와 예상문제로 제작된것으로서 시험문제를 거의 100%커버하고 있습니다. ITExamDump제품을 한번 믿어주시면 기적을 가져다 드릴것입니다.
시험 번호/코드: 070-545-VB
시험 이름: Microsoft (TS:Microsoft Visio 2007, Application Development)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 54 문항
업데이트: 2014-04-17
ITExamDump의Microsoft 070-545-VB시험자료의 문제와 답이 실제시험의 문제와 답과 아주 비슷합니다. 우리의 짧은 학습가이드로 빠른 시일 내에 관련지식을 터득하여 응시준비를 하게 합니다. 우리는 우리의Microsoft 070-545-VB인증시험덤프로 시험패스를 보장합니다.
070-545-VB 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-545-VB.html
NO.1 You are developing an Office Visio 2007 Shared Add-in. You create three objects named objMaster,
objPage, and objWindow. The object objMaster references a local copy of the master. The object objPage
references the current page. The object objWindow references the active window. You need to create
several shape instances of the master on the current page at specific coordinates in the active window.
Which method should you use?
A. objPage.Drop()
B. objPage.DropMany()
C. objWindow.CreateSelection()
D. objMaster.Shapes.Item(1).Copy() objPage.Paste()
Answer: B
Microsoft 070-545-VB pdf 070-545-VB
NO.2 You are developing an Office Visio 2007 Shared Add-in. You need to modify the add-in to perform an
action after the Visio 2007 application flushes its events queue. What should you do?
A. Listen for AppDeactivated.
B. Listen for RunModeEntered.
C. Listen for MustFlushScopeBeginning.
D. Queue a MarkerEvent and then listen for a MarkerEvent.
Answer: D
Microsoft자격증 070-545-VB 070-545-VB 070-545-VB 070-545-VB
NO.3 You are creating an application that will be used to connect two two-dimensional (2-D) shapes by
using a Dynamic Connector shape. In your application, you create an object named myVisioApp that
references the Visio Application object. You need to add code to your application to connect the 2-D
shapes. What code should you add?
A. myVisioApp.Active P age.Shapes(1). Cells(PinX). GlueTo( myVisioApp.Active P
age.Shapes(2) .Cells(PinX) )
B. myVisioApp.Active P age. Shapes(1).Cells(BeginX).GlueTo
myVisioApp.ActivePage.Shapes(2).Cells(Connections.X1)
C. myVisioApp.Active P age.Shapes(1).AutoConnect( myVisioApp.Active P age.Shapes(2),
visAutoConnectDirNone)
D. myVisioApp.Active P age.Shapes(1).AutoConnect( myVisioApp.Active P age.Shapes( 1 ) ,
visAutoConnectDirRight )
Answer: C
Microsoft 070-545-VB 070-545-VB 070-545-VB시험문제
NO.4 You are developing an Office Visio 2007 Shared Add-in. You need to prevent shape deletions by
using custom logic. What should you do?
A. Configure the add-in to listen to the QueryCancelPageDelete event of the Visio 2007 application.
B. Configure the add-in to listen to the QueryCancelSelectionDelete event of the Visio 2007 application.
C. Configure the add-in to listen to the BeforeShapeDelete event of the Visio 2007 application.
D. Configure the add-in to listen to the BeforeSelectionDelete event of the Visio 2007 application.
Answer: B
Microsoft 070-545-VB 070-545-VB인증 070-545-VB시험문제
NO.5 You create a custom template and several custom stencils. You need the stencils to open
automatically when a new file is created from the template. What should you do?
A. Deploy the stencils to the My Shapes folder.
B. Deploy the stencils to the same folder as the template.
C. Dock the stencils in the template workspace, and then save the template.
D. Modify the Office Visio 2007 application settings to contain the path to the stencils.
Answer: C
Microsoft 070-545-VB자격증 070-545-VB 070-545-VB자료
NO.6 You need to develop an Office Visio 2007 solution for 1,000 computers that run Visio 2007. The solution
must meet the following requirements:
The solution must not require the installation of additional components, tools, or DLLs.
Users must be able to customize the solution without installing additional development tools.
What should you develop?
A. A template and a Visio Solutions Library (VSL)
B. A custom stencil that uses ShapeSheet programming
C. A Windows Forms application that contains the Visio Drawing Control
D. A solution by using Microsoft Visual Studio 2005 Tools for Office Second Edition
Answer: B
Microsoft덤프 070-545-VB 070-545-VB 070-545-VB인증 070-545-VB
NO.7 You have a Windows Forms application that contains an embedded Visio Drawing Control. You have
an Office Visio 2007 drawing saved as C:\Template.vsd. You need to configure the application to load
and display the drawing as a template by using the Visio Drawing Control. Which code should you add
to the application?
A. Me.axDrawingControl1. Document. Application.Documents.Open( " C:\Template.VSD " )
B. Me.axDrawingControl1.Window.Application.Documents.Open( " C:\Template.VSD " )
C. Me.axDrawingControl1.Src = " C:\Template.VSD "
D. Dim openDockedFlag As Short = CShort(Visio.VisOpenSaveArgs.visOpenDocked)
Me.axDrawingControl1.Window.Application.Documents. OpenEx("C:\Template.VSD",openDockedFlag)
Answer: C
Microsoft최신덤프 070-545-VB 070-545-VB 070-545-VB자격증
NO.8 You are developing an Office Visio 2007 Shared Add-in. You create an object named objShape that
references a new shape. You need to modify the add-in to identify the shape if the shape is moved to a
different page. Which property of objShape should you reference?
A. ID
B. Name
C. NameID
D. UniqueID(visGetOrMakeGUID)
Answer: D
Microsoft덤프 070-545-VB 070-545-VB 070-545-VB
NO.9 You plan to create an Office Visio 2007 application. You need to prevent Visio 2007 from failing in the
event that there is a fault in the application. What are three possible ways to achieve this goal? (Each
correct answer presents a complete solution. Choose three.)
A. Create a VBA solution.
B. Create a VSL solution.
C. Create an EXE add-on solution.
D. Create a Shared Add-in solution, and then use the COM Shim Wizard to create a DLL.
E. Create a Shared Add-in solution by using Microsoft Visual Studio 2005 Tools for Office Second Edition.
Answer: CDE
Microsoft자료 070-545-VB인증 070-545-VB덤프
NO.10 You are developing an Office Visio 2007 Shared Add-in.
You construct an event sink class that listens to events from the Visio 2007 Application, Document, Page,
and Shape objects. The VisEventProc function has the following signature:
Public Function VisEventProc(
ByVal eventCode As Short,
ByVal source As Object,
ByVal eventId As Integer,
ByVal eventSequenceNumber As Integer,
ByVal subject As Object,
ByVal moreInformation As Object) As Object
You need to construct a switch to identify the object that raised the event.
Which parameter should you use?
A. eventCode
B. moreInformation
C. source
D. subject
Answer: C
Microsoft덤프 070-545-VB 070-545-VB
ITexamdump의 VCP5-DCV덤프의 VCE테스트프로그램과 C_TSCM52_66덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 ACMA_6.1시험에 대비한 고품질 덤프와 00M-663시험 최신버전덤프를 제공해드립니다. 최고품질 MB6-870시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기