70-545인증시험은Microsoft사의 인중시험입니다.Microsoft인증사의 시험을 패스한다면 it업계에서의 대우는 달라집니다. 때문에 점점 많은 분들이Microsoft인증70-545시험을 응시합니다.하지만 실질적으로70-545시험을 패스하시는 분들은 너무 적습니다.전분적인 지식을 터득하면서 완벽한 준비하고 응시하기에는 너무 많은 시간이 필요합니다.하지만 우리ITExamDump는 이러한 여러분의 시간을 절약해드립니다.
ITExamDump의 도움을 받겠다고 하면 우리는 무조건 최선을 다하여 한번에 패스하도록 도와드릴 것입니다. 또한 일년무료 업뎃서비스를 제공합니다. 중요한 건 덤프가 갱신이 되면 또 갱신버전도 여러분 메일로 보내드립니다. 망설이지 마십시오. 우리를 선택하는 동시에 여러분은70-545시험고민을 하시지 않으셔도 됩니다.빨리 우리덤프를 장바구니에 넣으시죠.
만약ITExamDump를 선택하였다면 여러분은 반은 성공한 것입니다. 여러분은 아주 빠르게 안전하게 또 쉽게Microsoft 70-545인증시험 자격증을 취득하실 수 있습니다. 우리ITExamDump에서 제공되는 모든 덤프들은 모두 100%보장 도를 자랑하며 그리고 우리는 일년무료 업데이트를 제공합니다.
시험 번호/코드: 70-545
시험 이름: Microsoft (TS: Microsoft Visio 2007, Application)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 86 문항
업데이트: 2014-04-08
현재 경쟁울이 심한IT시대에,Microsoft 70-545자격증 취득만으로 이 경쟁이 심한 사회에서 자신만의위치를 보장할수 있고 더욱이는 한층업된 삶을 누릴수 있을수도 있습니다. 우리ITExamDump 에서 여러분은Microsoft 70-545관련 학습지도서를 얻을 수 있습니다. 우리ITExamDump는 IT업계엘리트 한 강사들이 퍼펙트한Microsoft 70-545문제집을 만들어서 제공합니다. 우리가 제공하는Microsoft 70-545문제와 답으로 여러분은 한번에 성공적으로 시험을 패스 하실수 있습니다. 중요한것 저희 문제집을 선택함으로 여러분의 시간도 절약해드리고 무엇보다도 많은 근심없이 심플하게 시험을 패스하여 좋다는 점입니다.
Microsoft인증 70-545시험을 패스하여 자격증을 취득하여 승진이나 이직을 꿈구고 있는 분이신가요? 이 글을 읽게 된다면Microsoft인증 70-545시험패스를 위해 공부자료를 마련하고 싶은 마음이 크다는것을 알고 있어 시장에서 가장 저렴하고 가장 최신버전의 Microsoft인증 70-545덤프자료를 강추해드립니다. 높은 시험패스율을 자랑하고 있는Microsoft인증 70-545덤프는 여러분이 승진으로 향해 달리는 길에 날개를 펼쳐드립니다.자격증을 하루 빨리 취득하여 승진꿈을 이루세요.
IT업계에 종사하는 분이라면 국제적으로 인정받는 IT인증시험에 도전하여 자격증을 취득하셔야 합니다. ITExamDump의 Microsoft인증 70-545덤프는 이 시험에 참가한 IT인사들의 검증을 받은 최신 시험대비 공부자료입니다. ITExamDump의 Microsoft인증 70-545덤프로 시험을 쉽게 패스하여 자격증을 취득하면 승진이나 연봉인상에 많은 편리를 가져다드립니다. 저희는 항상 여러분들의 곁을 지켜줄것입니다.
ITExamDump의Microsoft인증 70-545덤프공부가이드에는Microsoft인증 70-545시험의 가장 최신 시험문제의 기출문제와 예상문제가 정리되어 있어Microsoft인증 70-545시험을 패스하는데 좋은 동반자로 되어드립니다. Microsoft인증 70-545시험에서 떨어지는 경우Microsoft인증 70-545덤프비용전액 환불신청을 할수 있기에 보장성이 있습니다.시험적중율이 떨어지는 경우 덤프를 빌려 공부한 것과 같기에 부담없이 덤프를 구매하셔도 됩니다.
70-545 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-545.html
NO.1 You are developing an Office Visio 2007 Shared Add-in. You need to modify the add-in to perform an action after the Visio 2007 application flushes its events queue. What should you do?
A. ListenforAppDeactivated.
B. Listen for RunModeEntered.
C. Listen for MustFlushScopeBeginning.
D. Queue a MarkerEvent and then listen for a MarkerEvent.
Answer: D
Microsoft 70-545 70-545 dumps 70-545
NO.2 You create a custom template and several custom stencils. You need the stencils to open automatically when a new file is created from the template. What should you do?
A. Deploy the stencils to the My Shapes folder.
B. Deploy the stencils to the same folder as the template.
C. Dock the stencils in the template workspace, and then save the template.
D. Modify the Office Visio 2007 application settings to contain the path to the stencils.
Answer: C
Microsoft dump 70-545 70-545인증 70-545
NO.3 You are developing an Office Visio 2007 Shared Add-in. You create three objects named objMaster, objPage, and objWindow. The object objMaster references a local copy of the master. The object objPage references the current page. The object objWindow references the active window. You need to create several shape instances of the master on the current page at specific coordinates in the active window. Which method should you use?
A. objPage.Drop()
B. objPage.DropMany()
C. objWindow.CreateSelection()
D. objMaster.Shapes.Item(1).Copy() objPage.Paste()
Answer: B
Microsoft시험문제 70-545 70-545최신덤프 70-545덤프 70-545
NO.4 You have a Windows Forms application that contains an embedded Visio Drawing Control.
You have an Office Visio 2007 drawing saved as C:\Template.vsd. You need to configure the
application to load and display the drawing as a template by using the Visio Drawing Control.
Which code should you add to the application?
A. Me.axDrawingControl1. Document.Application.Documents.Open( "C:\Template.VSD ")
B. Me.axDrawingControl1.Window.Application.Documents.Open( " C:\Template.VSD " )
C. Me.axDrawingControl1.Src = " C:\Template.VSD "
D. Dim openDockedFlag As Short = CShort(Visio.VisOpenSaveArgs.visOpenDocked) Me.axDrawingControl1.Window.Application.Documents. OpenEx("C:\Template.VSD",openDockedFlag)
Answer: C
Microsoft인증 70-545 70-545
NO.5 You are creating an application that will be used to connect two two-dimensional (2-D) shapes by using a Dynamic Connector shape. In your application, you create an object named myVisioApp that references the Visio Application object. You need to add code to your application to connect the 2-D shapes. What code should you add?
A. myVisioApp.Active P age.Shapes(1). Cells(PinX). GlueTo( myVisioApp.Active P age.Shapes(2) .Cells(PinX) )
B. myVisioApp.Active P age. Shapes(1).Cells(BeginX).GlueTo myVisioApp.ActivePage.Shapes(2).Cells(Connections.X1)
C. myVisioApp.Active P age.Shapes(1).AutoConnect( myVisioApp.Active P age.Shapes(2), visAutoConnectDirNone)
D. myVisioApp.Active P age.Shapes(1).AutoConnect( myVisioApp.Active P age.Shapes( 1 ) , visAutoConnectDirRight )
Answer: C
Microsoft자격증 70-545 pdf 70-545 70-545
NO.6 You plan to create an Office Visio 2007 application. You need to prevent Visio 2007 from failing in the event that there is a fault in the application. What are three possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose three.)
A. CreateaVBAsolution.
B. CreateaVSLsolution.
C. Create an EXE add-on solution.
D. CreateaSharedAdd-insolution,andthenusetheCOMShimWizardtocreateaDLL.
E. Create a Shared Add-in solution by using Microsoft Visual Studio 2005 Tools for Office Second Edition.
Answer: CDE
Microsoft 70-545시험문제 70-545 70-545 70-545시험문제
NO.7 You need to develop an Office Visio 2007 solution for 1,000 computers that run Visio 2007.
The solution must meet the following requirements:
The solution must not require the installation of additional components, tools, or DLLs. Users
must be able to customize the solution without installing additional development tools.
What should you develop?
A. A template and a Visio Solutions Library (VSL)
B. A custom stencil that uses ShapeSheet programming
C. A Windows Forms application that contains the Visio Drawing Control
D. A solution by using Microsoft Visual Studio 2005 Tools for Office Second Edition
Answer: B
Microsoft 70-545인증 70-545 70-545기출문제 70-545기출문제 70-545 pdf
NO.8 You are developing an Office Visio 2007 Shared Add-in. You need to prevent shape deletions by using custom logic. What should you do?
A. Configure the add-in to listen to the QueryCancelPageDelete event of the Visio 2007 application.
B. Configure the add-in to listen to the QueryCancelSelectionDelete event of the Visio 2007 application.
C. Configure the add-in to listen to the BeforeShapeDelete event of the Visio 2007 application.
D. Configure the add-in to listen to the BeforeSelectionDelete event of the Visio 2007 application.
Answer: B
Microsoft최신덤프 70-545 70-545 70-545
NO.9 You are developing an Office Visio 2007 Shared Add-in. You create an object named objShape that references a new shape. You need to modify the add-in to identify the shape if the shape is moved to a different page. Which property of objShape should you reference?
A. ID
B. Name
C. NameID
D. UniqueID(visGetOrMakeGUID)
Answer: D
Microsoft인증 70-545 70-545 dump 70-545
NO.10 You are developing an Office Visio 2007 SharedAdd-in.
You construct an event sink class that listens to events from the Visio 2007 Application,
Document, Page, and Shape objects. The VisEventProc function has the following signature:
Public Function VisEventProc(
ByVal eventCodeAs Short,
ByVal sourceAs Object,
ByVal eventIdAs Integer,
ByVal eventSequenceNumberAs Integer,
ByVal subjectAs Object,
ByVal moreInformationAs Object)As Object
You need to construct a switch to identify the object that raised the event.
Which parameter should you use?
A. eventCode
B. moreInformation
C. source
D. subject
Answer: C
Microsoft 70-545 70-545 70-545 pdf 70-545 pdf
ITexamdump의 MB2-701덤프의 VCE테스트프로그램과 E20-554덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 JN0-102시험에 대비한 고품질 덤프와 1z0-457시험 최신버전덤프를 제공해드립니다. 최고품질 74-353시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기