지금21세기 IT업계가 주목 받고 있는 시대에 그 경쟁 또한 상상할만하죠, 당연히 it업계 중FileMaker FM0-301인증시험도 아주 인기가 많은 시험입니다. 응시자는 매일매일 많아지고 있으며, 패스하는 분들은 관련it업계에서 많은 지식과 내공을 지닌 분들뿐입니다.
우리 ITExamDump사이트에서 제공되는FileMaker인증FM0-301시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보면 우리ITExamDump에 믿음이 갈 것입니다. 우리ITExamDump의 제품을 구매하신다고 하면 우리는 최선을 다하여 여러분들한테 최고의 버전을 제공함으로 한번에FileMaker인증FM0-301시험을 패스하도록 하겠습니다. IT시험이라고 모두 무조건 외우고 장악하고 많은 시간을 투자해야만 된다는 사상을 깨게 될 것입니다.
시험 번호/코드: FM0-301
시험 이름: FileMaker (Filemaker7 Developer essentials exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 120 문항
업데이트: 2014-02-07
FileMaker FM0-301인증시험을 패스하려면 시험대비자료선택은 필수입니다. 우리ITExamDump에서는 빠른 시일 내에FileMaker FM0-301관련 자료를 제공할 수 있습니다. ITExamDump의 전문가들은 모두 경험도 많고, 그들이 연구자료는 실제시험의 문제와 답과 거이 일치합니다. ITExamDump 는 인증시험에 참가하는 분들한테 편리를 제공하는 사이트이며,여러분들이 시험패스에 도움을 줄 수 있는 사이트입니다.
IT인증시험은 국제적으로 인정받는 자격증을 취득하는 과정이라 난이도가 아주 높습니다. FileMaker인증 FM0-301시험은 IT인증자격증을 취득하는 시험과목입니다.어떻게 하면 난이도가 높아 도전할 자신이 없는 자격증을 한방에 취득할수 있을가요? 그 답은ITExamDump에서 찾을볼수 있습니다. ITExamDump에서는 모든 IT인증시험에 대비한 고품질 시험공부가이드를 제공해드립니다. ITExamDump에서 연구제작한 FileMaker인증 FM0-301덤프로FileMaker인증 FM0-301시험을 준비해보세요. 시험패스가 한결 편해집니다.
ITExamDump의 FileMaker FM0-301덤프를 구매하기전 우선 pdf버전 덤프샘플을 다운받아 덤프문제를 공부해보시면ITExamDump덤프품질에 신뢰가 느껴질것입니다. ITExamDump의 FileMaker FM0-301덤프가 고객님의 시험패스테 조금이나마 도움이 되신다면 행복으로 느끼겠습니다.
FM0-301 덤프무료샘플다운로드하기: http://www.itexamdump.com/FM0-301.html
NO.1 Which three statements are true about field indexing in FileMaker Pro 7? (Choose three.)
A. Indexing improves the speed at which finds are performed.
B. Value lists require at least one of any field they reference to be indexed.
C. To establish a relationship between two fields, both fields are required to be indexed.
D. A value index, used in establishing relationships, stores up to 60 primary characters or digits per
return-delimited line.
E. Using Unicode or ASCII as the default language by which a field is indexed causes sorts on that field to
be case sensitive.
Answer: ABE
FileMaker dump FM0-301 FM0-301기출문제
NO.2 Which three are affected by changing the behavior of a field to navigate to the next field using Tab,
Enter and Return in FileMaker Pro 7? (Choose three.)
A. exiting a record
B. executing a find
C. scripted navigation
D. navigating tab order
E. continuing a paused script
Answer: ABE
FileMaker FM0-301 FM0-301 FM0-301최신덤프 FM0-301
NO.3 Click the Exhibit button.
Given the FileMaker Pro 7 Relationships Graph shown in the exhibit, which table occurrence should be
assigned to a layout that contains a portal that shows all students for all of a teacher's classes?
A. Classes
B. Advisors
C. Teachers
D. Enrollment
Answer: C
FileMaker dumps FM0-301기출문제 FM0-301 FM0-301시험문제
NO.4 A database has two tables, Planet and Moon. Moons are related to a single planet and their
relationship is set to delete related records in the Moon table when a Planet record is deleted. Which
two things happen when the Planet table is deleted from the Tables tab of the Define Database dialog?
(Choose two.)
A. All data in the Planet table are deleted.
B. All records in the Moon table are deleted.
C. All records in the Moon table remain unaffected.
D. All records in the Moon table are deleted if the option to "Also remove occurrences of these tables in
the graph" was selected when deleting the Planet table.
E. All table occurrences of both Planet and Moon tables are removed if the option to "Also remove
occurrences of these tables in the graph" was selected when deleting the Planet table.
Answer: AC
FileMaker FM0-301 FM0-301 FM0-301 dumps
NO.5 You want to sort related records within a portal in a FileMaker Pro 7 database. What two methods
allow you to do this? (Choose two.)
A. select Sort by in the Edit Value List dialog
B. select Sort records in the Edit Relationship dialog
C. select Sort portal records in the Portal Setup dialog
D. select Sort records for the portal's table occurrence in the Specify Table dialog
E. select the Records>Sort Records... menu item, then select the portal's table occurrence in the Sort
Records dialog
Answer: BC
FileMaker자격증 FM0-301 FM0-301 dumps FM0-301 FM0-301
NO.6 If a field in FileMaker Pro 7 has been set to validate Always, which three actions will trigger validation
on that field? (Choose three.)
A. importing data into that field
B. exporting data from that field
C. editing data in the field using Instant Web Publishing
D. clicking into the field, then immediately exiting the field
E. attempting to change the value of the field using a Set Field[ ] script step
Answer: ACE
FileMaker dumps FM0-301덤프 FM0-301 FM0-301자격증 FM0-301인증
NO.7 Consider the return delimited data in the Contact field of a FileMaker Pro 7 database are:
John Smith
Mary Jones
Julie Hyde
Which three formulas could be used to extract the string Mary Jones from Contact? (Choose three.)
A. Middle (Contact ; 12 ; 10)
B. MiddleValues (Contact ; 2)
C. MiddleWords (Contact ; 3 ; 2)
D. MiddleWords (Contact ; 3 ; 4)
E. MiddleValues (Contact ; 2 ; 1)
Answer: ACE
FileMaker FM0-301자격증 FM0-301 FM0-301기출문제 FM0-301자료 FM0-301 dump
NO.8 Click the Exhibit button.
On a FileMaker Pro 7 layout based on the table occurrence Teachers, a portal is designed to show all the
students based on the table occurrence Students. Which two statements are true about adding a new
student in the portal? (Choose two.)
A. The table occurrence Students must be directly connected to Teachers.
B. All the relationships from Teachers to Students must be set to be able to create records.
C. Only the relationship between Enrollment and Students must allow creation of related records.
D. All the relationships between the table occurrence Teachers and the table occurrence Students must
use the = operator.
Answer: CD
FileMaker인증 FM0-301자격증 FM0-301 FM0-301기출문제
NO.9 What is the maximum number of characters that can be entered or imported into a text field in
FileMaker Pro 7?
A. 64 thousand
B. 1 million
C. 1 billion
D. 1 trillion
E. Number of characters is limited only by disk space.
Answer: C
FileMaker FM0-301 FM0-301 dumps FM0-301 dump
NO.10 Click the Exhibit button.
You want to build a FileMaker Pro 7 database that models a business organizational chart. One person
may manage no one or many people. One person may be managed by at most one other person.
You want to build the system in such a way that a single layout showing information about a person can
display both the name of the current person's manager (if any) and the names of all people managed by
the current person.
What is the minimum number of tables you must define in the Tables tab of the Define Database dialog to
construct the layout?
A. one
B. two
C. three
D. four
Answer: A
FileMaker인증 FM0-301 FM0-301 dump FM0-301 FM0-301 FM0-301자료
NO.11 Which three statements about field validation are true in FileMaker Pro 7? (Choose three.)
A. Fields can only be validated by a single criterion.
B. Field validation warnings may be triggered by scripts.
C. Users can be prevented from overriding the validation warning.
D. Users can be presented with a specific message that will see when a field fails validation.
E. A script can be specified to run when manually entered field data fails validation.
Answer: BCD
FileMaker FM0-301덤프 FM0-301시험문제 FM0-301
NO.12 Which statement is true in FileMaker Pro 7?
A. The Save record changes automatically layout option does not apply to users with [Full Access]
privileges.
B. On a layout by layout basis, you can specify whether record changes made in Browse mode will be
saved automatically.
C. On a layout by layout basis, you can specify whether changes made to the layout when exiting Layout
mode will be saved automatically.
D. If the Save record changes automatically option has been turned off for a layout, then users will be
prompted to save their changes only when exiting the layout.
Answer: B
FileMaker FM0-301자격증 FM0-301기출문제 FM0-301자료 FM0-301덤프 FM0-301
NO.13 Given the following formula:
If( DayOfWeek (myDate) = 3 and (myField = 13 or myField = 23) ;
Get (FoundCount) ; Get (TotalRecordCount))
Which two statements are true? (Choose two.)
A. If myField is 13, the test to see if myField = 23 will not be performed.
B. If DayOfWeek(myDate) returns 6, neither of the tests involving myField will be performed.
C. If DayOfWeek(myDate) returns 3 and myField returns 8, then this formula will return the total number
of records in the found set.
D. Regardless of whether the test is true or false, both Get(FoundCount) and Get(TotalRecordCount) will
be evaluated during execution of this formula.
Answer: AB
FileMaker FM0-301 dumps FM0-301 FM0-301 FM0-301시험문제
NO.14 What is the maximum number of files that can be hosted on FileMaker Server 7?
A. 125
B. 250
C. 350
D. 500
E. The number is limited only by server hardware.
Answer: A
FileMaker인증 FM0-301최신덤프 FM0-301덤프 FM0-301
NO.15 Which two statements about relationships are true in FileMaker Pro 7? (Choose two.)
A. The > operator only works using numeric match fields.
B. You can build a relationship using multiple match fields.
C. It is possible to create a valid relationship where one match field is unindexed.
D. A table occurrence must be connected to at least one other table occurrence.
E. When enabling the option, "Allow creation of records in this table via this relationship", only =, >=,
<= will properly populate match keys.
Answer: BC
FileMaker FM0-301 FM0-301 FM0-301
NO.16 Consider two FileMaker Pro 7 files, Alpha and Beta, where a table from Beta appears as an externally
referenced table occurrence on Alpha's Relationships Graph. Which three statements are true? (Choose
three.)
A. Layouts in Alpha can display data from Beta.
B. Alpha can contain multiple valid file references to Beta.
C. It is impossible to lock records in both Alpha and Beta simultaneously.
D. Layouts from Beta cannot be displayed in the same window as layouts from Alpha.
E. A table occurrence from Beta is required on Alpha's Relationships Graph in order to call a script in Beta
from Alpha.
Answer: ABD
FileMaker FM0-301 FM0-301 FM0-301자격증 FM0-301 FM0-301
NO.17 Click the Exhibit button.
You have a FileMaker Pro 7 layout based on the table occurrence of Classes. You have a portal showing
records from the table occurrence Students.
What happens if you place the field Students::Name into the portal?
A. The field displays <Field Missing> .
B. The field displays an enrolled student's name in each row of the portal.
C. The field displays the first matching student's name in every portal row.
D. The field displays an enrolled student's name in each row of the portal only if the student name is
calculated in the Enrollment table.
Answer: B
FileMaker FM0-301 FM0-301 FM0-301 FM0-301
NO.18 Consider a FileMaker Pro 7 database with the following tables and fields:
Using only Cartesian (cross or x ) relationships between occurrences of these tables, sorting if necessary,
which two actions can be performed? (Choose two.)
A. determine the mode of the order amount
B. determine the date of the most recent order
C. display all records from the Customer table in a portal
D. create a value list that shows all orders for a chosen customer
E. create a portal to show one record for each product that has ever been ordered
Answer: BC
FileMaker FM0-301자료 FM0-301 FM0-301시험문제
NO.19 A number field in FileMaker Pro 7 called AmountPaid is set to auto-enter the following formula:.
The Do not replace existing value of field (if any) option is unchecked.
Which statement is true?
A. The calculation will only be evaluated the first time a value is entered into AmountPaid .
B. A user will not be able to manually edit the field once the calculation has been evaluated.
C. If the value in the AmountDue field is changed, the AmountPaid field will be re-evaluated.
D. The calculation will prevent a user from entering an incorrect value into the AmoundPaid field.
Answer: C
FileMaker FM0-301덤프 FM0-301최신덤프 FM0-301 dumps
NO.20 Click the Exhibit button
Consider a FileMaker Pro 7 database with two tables called Salesperson and Order, and a relationship
between the two tables based on a SalespersonID field. The relationship is configured as shown in the
exhibit. There is a layout called Salesperson Detail, based on the Salesperson table occurrence, with a
portal showing Order records via the above relationship.
Which three statements are true? (Choose three.)
A. Deleting a Salesperson record also deletes all related Order records.
B. It is possible to create new Order records by importing data into the Salesperson table.
C. It is possible to create new Salesperson records by importing data into the Order table.
D. Users may create new Order records by entering data into the portal on the Salesperson Detail layout
E. It is possible to create a new Salesperson record using a Set Field [ ] script step in a script that runs in
the context of the Order table.
F. It is possible to create a new Salesperson record by typing into a related salesperson field displayed on
a layout that is based on the Order table.
Answer: DEF
FileMaker FM0-301 FM0-301 FM0-301 FM0-301
ITexamdump의 000-350덤프의 VCE테스트프로그램과 C4040-124덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 00M-617시험에 대비한 고품질 덤프와 1Z0-478시험 최신버전덤프를 제공해드립니다. 최고품질 00M-503시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기